When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I purchased my 2014 E250 in August and felt like my interior was incomplete. Last week I made the decision to purchase a woodgrain steering wheel and swap it out.
I'm pleasantly surprised on how easy it was and best of all no errors
So I purchased my 2014 E250 in August and felt like my interior was incomplete. Last week I made the decision to purchase a woodgrain steering wheel and swap it out.
I'm pleasantly surprised on how easy it was and best of all no errors
That's good news! Last summer, I asked several dealers and MB Hq about swapping to a wood steering wheel on several new E350s I had seen on their lots, and MB sternly told me and dealers to not do it: "way too complicated."
Fortunately, I got lucky later on and found the right E350 with a wood sports steering wheel. Congrats to you - looks great!
Oh my god! DETAILS DETAILS!!! price for install and the unit. PLEASE
Ive been asking about this since the day i got mine. Not that I dislike the leather weheel. It is in fact quite plush and wonderful to hold. However, QUITE fragile. My nails have put two permannet scratches in it already. After the sun damage begins to tarnish it id like to swap it too +D
heard ppl say you have to get the exact same year wheel so the options all match or something...
I got extremely lucky. I was browsing ebay almost everyday looking for one. I ended up buying a new steering wheel off of ebay and I was able to use the same airbag.
The steering wheel I bought was listed as a CLS and E class steering wheel. I heard some people have problems when they swap the steering wheel the buttons won't work, but all of mine still work.
Installation was pretty simple, unplug the battery so you don't get the infamous airbag light, remove the airbag, unbolt the steering wheel make sure you mark where the steering wheel was and install the new one.
I think there are detailed instructions in the C Class forums.
Might be a stupid question, but was there any re-programming required when you disconnect the battery? Especially the radio (I heard there is a code you have to re-input).
Most steering wheels that are the same design will fit and all buttons will work without reprogramming. I believe that if the airbag fits, then all is well. I noticed that MB is changing the steering wheel designs again, maybe someone is brave enough to see if they are interchangeable. They certainly look nicer than the current ones.
Hello!!! Did you replace PCB from that older 4spoke steering wheel to the new 3spoke amg wheel?
Thank you for any information!!! I'm on the same path Just struggling to make electronics working.
So I purchased my 2014 E250 in August and felt like my interior was incomplete. Last week I made the decision to purchase a woodgrain steering wheel and swap it out.
I'm pleasantly surprised on how easy it was and best of all no errors
Good job on the upgrade, I did mine fairlu recently too.
Did you bought the air bag too?
Mine's circle leather and people told me I have to buy airbag too of I want flat bottomed.
So, went with circular.
I'm happy to say guys i was successful from 4spoke to 3spoke flat bottom wooden amg. needed to change circuit board for electronics to work, paddle shifters, light, buttons, horn, lane keep assist vibrator works! had to clip some unused wires for heat element from old circuit. thanks to this forum, i've found here info and hope to do it myself
Last edited by W212David; Apr 28, 2018 at 06:12 PM.
Hello gents. Can someone offer some advice please? I'm trying to go from flat bottom to a rounded wood wheel. It's not gonna work is it? My flat bottom has lane assist (vibration) and I have no idea if the wood one has that or not. I have asked the seller and I am waiting for their reply. But I think my issue is going to be with the airbag from my flat bottom not fitting into the rounded wheel, right? Also, after reading this thread, it looks like I may have some circuit board issues to deal with. I don't want to have to do that. Advice please. Thanks.
Last edited by akingzkid; Aug 1, 2018 at 09:20 AM.
Reason: To post pics of steering wheels
Could someone be kind enough to explain to me what a PCB Board is and how do you swap it from your old steering wheel to the new one?
I’m also running into the same exact issue where I replaced my 2011 E550 OEM steering wheel for the 2014 E550 AMG steering wheel and the buttons or the horn isn’t working. Any help would be greatly appreciated. Thank you in advance!
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
