2014 E350 Sport to E63 Front Bumper Conversion
Thread Starter
Super Member
Joined: Feb 2017
Posts: 559
Likes: 166
From: Rhode Island
2014 E350 Sport (sold), 2015 S550 Sport (sold), 2018 S560 Sport (sold), 2018 GLE43, 2014 E550
2014 E350 Sport to E63 Front Bumper Conversion
Hey Folks, brand new to the forum and figured I would give this post a shot. This is my first Mercedes and I love it so far (prior cars were Lexus GS300, then Infiniti M35, then Infiniti QX60)! I have recently fell in love with the E63 front bumper. My question is, has anybody else done this conversion? I plan on going fully aftermarket based on how high OEM prices and the fact that I don't need the bumper holes as I have no front sensors. My main concerns are:
Will it fit my car?
Will my illuminated star mount into the grille?
Will the engine under carriage cover attach to it correctly?
Will the wheel well covers attach to it correctly?
I posted the one I was looking at below, however; i'll willing to buy elsewhere if I know it is going to mount up correctly and look OEM. Not trying to cut corners here but I also don't want to break the bank, the car was expensive enough for me...
http://www.ebay.com/itm/291806833624...%3AMEBIDX%3AIT
Will it fit my car?
Will my illuminated star mount into the grille?
Will the engine under carriage cover attach to it correctly?
Will the wheel well covers attach to it correctly?
I posted the one I was looking at below, however; i'll willing to buy elsewhere if I know it is going to mount up correctly and look OEM. Not trying to cut corners here but I also don't want to break the bank, the car was expensive enough for me...
http://www.ebay.com/itm/291806833624...%3AMEBIDX%3AIT
Junior Member
Joined: Jan 2016
Posts: 41
Likes: 1
2008 GL550 Polar White, 2014 E550 4matic Designo Diamond White Metallic
I have also been looking to do the same, fully aftermarket. As for the fenders, I don't believe we need to change them if we use the aftermarket E63 bumper conversion. Yes, the OE E63 fenders are wider than ours; but, we only need to change them if we go the OE bumper route. I am sure someone on the board has done this aftermarket conversion without the fenders. Let's see if they can chime in!
Junior Member
Joined: Jul 2015
Posts: 20
Likes: 1
BMW M6 Gran Coupe
Hey Folks, brand new to the forum and figured I would give this post a shot. This is my first Mercedes and I love it so far (prior cars were Lexus GS300, then Infiniti M35, then Infiniti QX60)! I have recently fell in love with the E63 front bumper. My question is, has anybody else done this conversion? I plan on going fully aftermarket based on how high OEM prices and the fact that I don't need the bumper holes as I have no front sensors. My main concerns are:
Will it fit my car?
Will my illuminated star mount into the grille?
Will the engine under carriage cover attach to it correctly?
Will the wheel well covers attach to it correctly?
I posted the one I was looking at below, however; i'll willing to buy elsewhere if I know it is going to mount up correctly and look OEM. Not trying to cut corners here but I also don't want to break the bank, the car was expensive enough for me...
http://www.ebay.com/itm/291806833624...%3AMEBIDX%3AIT
Will it fit my car?
Will my illuminated star mount into the grille?
Will the engine under carriage cover attach to it correctly?
Will the wheel well covers attach to it correctly?
I posted the one I was looking at below, however; i'll willing to buy elsewhere if I know it is going to mount up correctly and look OEM. Not trying to cut corners here but I also don't want to break the bank, the car was expensive enough for me...
http://www.ebay.com/itm/291806833624...%3AMEBIDX%3AIT
Newbie
Joined: Apr 2020
Posts: 8
Likes: 1
2014 Mercedes E550
E63 front conversion.
