New Rims
#1
Junior Member
Thread Starter
Join Date: Jul 2015
Location: St Augustine, FL
Posts: 57
Likes: 0
Received 4 Likes
on
3 Posts
2013 E350 Bluetec, 2007 Corvette supercharged, Saab 9-5, Hyundai Genesis Sedan
New Rims
Well after much debate I decided to do new rims. I came across a killer deal on craigs list. They were manufactured by Enkei but were sold by A&L Racing (long since out of business) and are forged using their MAT process. 5x112 8.5x19 38mm offset and Extremely light - 17-18lb. I picked up 5 rims, with one brand new in the box for $250.
The rims had zero curb rash and only a few small paint nicks. Only issue was the lips appeared to be stained with something - tried every cleaner and no luck. I ended up using a buffing wheel and took the stain (and clear coat in the process) off. They turned out much better than I had expected.
Well as 19's I needed new tires (245/35/19) and TPMS. Would have liked more sidewall but nothing larger would have fit) Since the rims are so open and shows everything, I painted the hubs and rotors with a satin high temp paint. I also added spacers 5mm up front and 15 in the rear.
I am very happy how everything turned out but will take a little getting use to. More work than expected and with the tires a bit more $$ than I had planed, even considering the deal on the rims.
The rims had zero curb rash and only a few small paint nicks. Only issue was the lips appeared to be stained with something - tried every cleaner and no luck. I ended up using a buffing wheel and took the stain (and clear coat in the process) off. They turned out much better than I had expected.
Well as 19's I needed new tires (245/35/19) and TPMS. Would have liked more sidewall but nothing larger would have fit) Since the rims are so open and shows everything, I painted the hubs and rotors with a satin high temp paint. I also added spacers 5mm up front and 15 in the rear.
I am very happy how everything turned out but will take a little getting use to. More work than expected and with the tires a bit more $$ than I had planed, even considering the deal on the rims.
#2
MBWorld Fanatic!
Join Date: Oct 2005
Location: Chicagoland
Posts: 4,920
Received 1,616 Likes
on
1,186 Posts
2014 E550-sold 😩
those look really nice and you have a spare now in case of meeting the pothole from hell.
Did you order OEM MB TPMS sensors or go with Shrader or some other aftermarket supplier?
Did you order OEM MB TPMS sensors or go with Shrader or some other aftermarket supplier?
#3
MBWorld Fanatic!
Can I see the front side shot closer I am doing the same setup front and want to see if they stick out at all. I hope not. 19x8.5 et38 and 9.5 et43 rear
Congrats they look great
Congrats they look great
#4
Junior Member
Thread Starter
Join Date: Jul 2015
Location: St Augustine, FL
Posts: 57
Likes: 0
Received 4 Likes
on
3 Posts
2013 E350 Bluetec, 2007 Corvette supercharged, Saab 9-5, Hyundai Genesis Sedan
OEM sensors - ebay no more expensive than aftermarket.
Just weighted my old rims (w211 18" sport) with tires. Looks like this set up is 10lb lighter per corner 54lb bs vs 44lb
Just weighted my old rims (w211 18" sport) with tires. Looks like this set up is 10lb lighter per corner 54lb bs vs 44lb
The following users liked this post:
raja777m (05-23-2017)
#7
MBWorld Fanatic!
Rims look great! Congrats on the deal! Careful with ebay TPMS though, only buy from a guy with great to perfect feedback -- I was burned on two 'OE' sensors. Not a big loss, but be aware.