2013 W212 E550 4Matic Front Brake Rotors wrapped and vibrating whenever brake apply
Shade section clearly visible and this is not wrapped (I just forgot the technical term for it) but I put Wrapped there anyway
Just a second take on Left Front Inside. I can't find the Manufacture Stamp on the Rotor.
On the Outside of the Left Front wrapped is visible
Badly defective here on the Right Front Inside
Right Front Outside is wrapped very badly, this cause the massive vibration every time brake apply
Benz OE Front Pads is Brembo, very good though , it's till have 85% left but I replace with new Pads anyway. Notice that there's sticky 2 circles on the back of the Pads, that should be brake quiet and it stick to the Caliber Piston very hard to pull it out unless you remove the Caliber Housing.
I love Centric and have been using it on my BMW M3s and now on my Benz. Even though it made in China but I never have any issue.
Posi Quiet is also Centric originaly, I did not use Brake Quiet Spray Products even tthough I'd brought it. I also reused the 2 long Secure Pins and Blade Spring Shim.




Stamped info will be on cylindrical part, where you have printed "front left outside"
just received my new centric rotors , and probably will go with Posi Quiet centric pads.
(brake pads still at id say 70% of wear left on them) , hate to do this and such a waste of money but benz is a benz. You all know what im talking about.
good luck to you OP , post and update later on.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F33 2109700296
Do 2012 and up have different pads/calipers than 2010?






