When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey everyone, just bought my first Mercedes project - a 2014 E350 Wagon. It was involved in an accident in which the steering wheel and driver's knee airbag deployed, and the car currently doesn't start. From what I understand the positive battery terminal deploys and needs to be replaced - which is about $320 at the dealer, and engine start needs to be re-enabled by a diagnostic scanner. Is there anything else I need to do to get the car running? If anyone has ever dealt with blown airbags, advice would be appreciated. Thanks
Those are the years, when MB added SCN coding to their cars, so you'll be in mercy of stealers.
If you feel like standing up to what is right - register at https://repair.org/stand-up
I know in poking around in Xentry I've seen functions to reset "collision" and required initialization of modules following airbag replacement and/or collision. I imagine, besides any parts needed... you'll need access to an appropriate diagnostic scanner.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
