Gear shifting
#1
Newbie
Thread Starter
Join Date: Sep 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
w212 7g 2012
Gear shifting
My car is Shifting from D to P when I drive with low acceleration. When I drive with low speed. Anyone who can help me with this problem?
my car is w212 from 2012 7g, the computer is not making any failure.
my car is w212 from 2012 7g, the computer is not making any failure.
Last edited by Kristina.i; 09-19-2019 at 01:30 PM.
#2
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,113
Received 1,747 Likes
on
1,393 Posts
1922 Ford Model T / no OBD
Start with checking all door switches.
Are the interior lights going out fast when you close the doors, or need several seconds?
Are the interior lights going out fast when you close the doors, or need several seconds?
#3
Newbie
Thread Starter
Join Date: Sep 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
w212 7g 2012
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Electronic ignition switch may need replacement. See attached bulletin, if VIN is below A776831 defective switch was installed at production. If this is the case request goodwill replacement from MB.
#5
Senior Member
Join Date: Nov 2018
Location: California
Posts: 443
Received 69 Likes
on
56 Posts
2013 E550 4MATIC - P1, P2, SPORT
Konigs you're the man, as always.
My 2013 has *A716236. I read over the bulletin but this would be my first time dealing with something like this. Would this apply to me as well since it's the 212 model? Also, is there a way I can check if a previous owner had this performed?
My 2013 has *A716236. I read over the bulletin but this would be my first time dealing with something like this. Would this apply to me as well since it's the 212 model? Also, is there a way I can check if a previous owner had this performed?
#6
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
You’re within VIN range, bulletin is applicable. Have dealer check vehicle master inquiry (VMI) to see if repair was already performed.
The following users liked this post:
TeeEl (09-21-2019)