Help identifying this part
#1
Super Member
Thread Starter
Help identifying this part
Noticed some oil leakage around the engine bay while doing the oil and think I may have pinpointed the source of leakage.
The reason I believe this is because the pictured part is the only area where I see fresh oil deposit.
Connection to this part is a one to one and a half inch in diamater hose coming from the intercooler.
The reason I believe this is because the pictured part is the only area where I see fresh oil deposit.
Connection to this part is a one to one and a half inch in diamater hose coming from the intercooler.
Last edited by Crna Mechka; 05-29-2020 at 07:34 PM.
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
Coolant pump, see attachment for part #s.
The following 2 users liked this post by konigstiger:
Crna Mechka (05-30-2020),
pierrejoliat (06-01-2020)
#3
Super Member
Thread Starter
Danke schon konig-
The oil soaked part appears to be 110 # A 276 200 01 56 per the schematic. When I search the part number I get 'water inlet pump'. Am I getting this right?
The oil soaked part appears to be 110 # A 276 200 01 56 per the schematic. When I search the part number I get 'water inlet pump'. Am I getting this right?
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
Correct, if this is the source note associated seal 120.