Doing a fluid overhaul.
Thread Starter
Junior Member
Joined: Aug 2017
Posts: 70
Likes: 10
w212
Doing a fluid overhaul.
My 2014 4matic sedan has 67k miles and it’s the first time I’m doing fluids (aside from oil of course). I’ll be swapping the transmission oil, diff oil, coolant and brake fluid. Any list of fluid capacities? Where can I read into acceptable fluids? Would like to use good stuff throughout.
Super Member
Joined: Jun 2022
Posts: 739
Likes: 328
From: WA State, USA
2014 Cummins, 2014 E250 Bluetec
Bunch of threads on this, dont forget the front diff. It calls for .6L which is what I put in mine. Its super easy but you dont have a fill hole so you have to do it all from the drain hole. Rear diff is normal fill till it comes out top hole. Trans is add per whichever one you have run it to required temp and drain excess while idling.
Good luck, watch some videos and or use your wiz if ya have it.
Good luck, watch some videos and or use your wiz if ya have it.
Last edited by Quint22; Jun 2, 2024 at 11:03 PM.
