When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you mean the 1st part with the button that opens the console under the armrest?
If so just wriggle it backwards and upwards and it will pop out.
If you are talking about the actual console lift it up from the middle and pull it back towards to rear of the car. This won't come loose until you detach all of the wires
Check out my pics and you'll have a better idea of both parts
"If so just wriggle it backwards and upwards and it will pop out." Tried this but it's still super tight and won't come off.
Thanks a lot for everyone who have posted in this awesome thread! I have just switched my crappy black console with the carbon fiber one (Even though it looked a little bit different than the Metal Weave trim that I have, but it was definitely better than the dusty black console). I would like to see anyone who is feeling nervous about this to calm down and once you start unscrewing you wouldn't be stuck in any of those steps. Thanks a lot Vic!
Thanks a lot for everyone who have posted in this awesome thread! I have just switched my crappy black console with the carbon fiber one (Even though it looked a little bit different than the Metal Weave trim that I have, but it was definitely better than the dusty black console). I would like to see anyone who is feeling nervous about this to calm down and once you start unscrewing you wouldn't be stuck in any of those steps. Thanks a lot Vic!
Nice, this gives me a bit more confidence to attempt the change. Btw do you have a photo? Would love to see the carbon fiber console.
Thanks a lot for everyone who have posted in this awesome thread! I have just switched my crappy black console with the carbon fiber one (Even though it looked a little bit different than the Metal Weave trim that I have, but it was definitely better than the dusty black console). I would like to see anyone who is feeling nervous about this to calm down and once you start unscrewing you wouldn't be stuck in any of those steps. Thanks a lot Vic!
Do you have the part number for the carbon fiber console? I think it will look better than piano black with my "magnolia flowing lines" trim.
Pretty easy. No screws juat some tabs and it pops out. Use a small flat head screwdriver and it is much easier to lift the tabs
I did the command panel first. Not a huge issue but there are one or two bits from the A/C panel in the way that make it easier to do the A/C panel first
Hi AceVentura, can you share with me the parts number you got for the center panel - and is your car a Sedan instead of Coupe? Thanks!
Do you have the part number for the carbon fiber console? I think it will look better than piano black with my "magnolia flowing lines" trim.
TIA
Unfortunately I got it without tags, but my dealership are able to order it by giving them the VIN number (For some reason the don't look up parts by part numbers lol). I basically searched for an E63s and filtered the results to "Most expensive" and found an E63s with the carbon fiber trim and took that VIN number and gave it to the dealership. If the closest dealership to you doesn't do that, just call Mercedes Benz of Farmington and they'll order it for you.
Here is a VIN number of an e class with the carbon fiber trim: WDDZF8KB3JA291307
Unfortunately I got it without tags, but my dealership are able to order it by giving them the VIN number (For some reason the don't look up parts by part numbers lol). I basically searched for an E63s and filtered the results to "Most expensive" and found an E63s with the carbon fiber trim and took that VIN number and gave it to the dealership. If the closest dealership to you doesn't do that, just call Mercedes Benz of Farmington and they'll order it for you.
Here is a VIN number of an e class with the carbon fiber trim: WDDZF8KB3JA291307
Good thinking. I have an e43 and when I go to replace mine, I'd like to get the AMG ashtray cover area with the AMG logo. I have the black ash wood trim and figured it might be a different part number to get that
Good thinking. I have an e43 and when I go to replace mine, I'd like to get the AMG ashtray cover area with the AMG logo. I have the black ash wood trim and figured it might be a different part number to get that
Good luck finding the part you're looking for! I'd love to see photos of your new console once you get it
In Canada the parts are $1400 CDN plus labour. I ordered my E43 with the Black Ash but it was delivered with the cheap looking shiny plastic. It's a small thing for MB but likely the reason I will not buy another Mercedes. The MB customer service experience is horrible.
In Canada the parts are $1400 CDN plus labour. I ordered my E43 with the Black Ash but it was delivered with the cheap looking shiny plastic. It's a small thing for MB but likely the reason I will not buy another Mercedes. The MB customer service experience is horrible.
You guys are lucky you get a choice, here in Australia, MB doesn't even bother with offering it as an option.
I dropped my 2017 E300 off at the Dealership this past Saturday to address a rattle in the rearview mirror. They gave me a 2018 E300 with Black Ash Open Pore center console and it looked really classy, especially when viewed next to the Piano Black cheap plastic in my 2017. I was so disappointed, I felt compelled to fire off the following email to MBUSA.
The piano black center console in my 2017 E300 Sport is a scratch and smudge magnet and I have noticed that MB has now replaced it with matching wood trim in the 2018s. After seeing the Black Ash open pore wood trim console in a 2018 loaner, it does add a classier touch and shows up the cheapness of the piano black plastic even more. A lot of E300 owners have complained about this same problem. I just feel like MB blew it by using this plastic piano black center console in what is an otherwise impeccably appointed E300 cabin. The fact that MB chose to address it so early in the model cycle is a clear admission that this was a departure from your "Best or Nothing" mantra. The part number for a Black Ash open pore center console wood trim is A238 680 15 03 and MB's sale price is $337. Is this something my MB dealer would be able to install for me?
This is my first Mercedes and I, along with many customers who bought the 2017 E300, feel like we have been given the short end of the stick as early adopters. There is no place for this kind of cheap plastic trim in a 60K car that has the prestige of an MB badge on it. I really take the "Best or Nothing" tag line at face value and hope MB means what it says and says it means. Please advise.
Kind Regards,
Donovan
I would suggest that anyone who would like to see a meaningful response follow suit and fire off an email to MBUSA as well as provide feedback to the Service Director at your local dealership. There is true strength in numbers, and the pen is mightier than the sword.
I have a Mercedes Benz E Class W213 and needed some help. I removed my center console to gain access to the command unit however during the process I have lost one of the original screws. It's not the first ones under the rubber gromets but one of the ones which is visible once you remove the latch button.
is there anyone who can help source this original screw as I've looked everywhere but can't find it and dealer is unable to help either.
I would appreciate the help or if anyone has a spare one I would be happy to buy it.
I have a Mercedes Benz E Class W213 and needed some help. I removed my center console to gain access to the command unit however during the process I have lost one of the original screws. It's not the first ones under the rubber gromets but one of the ones which is visible once you remove the latch button.
is there anyone who can help source this original screw as I've looked everywhere but can't find it and dealer is unable to help either.
I would appreciate the help or if anyone has a spare one I would be happy to buy it.
I dropped my 2017 E300 off at the Dealership this past Saturday to address a rattle in the rearview mirror. They gave me a 2018 E300 with Black Ash Open Pore center console and it looked really classy, especially when viewed next to the Piano Black cheap plastic in my 2017. I was so disappointed, I felt compelled to fire off the following email to MBUSA.
I would suggest that anyone who would like to see a meaningful response follow suit and fire off an email to MBUSA as well as provide feedback to the Service Director at your local dealership. There is true strength in numbers, and the pen is mightier than the sword.
While my car is still in the shop, I asked my dealer to provide a quote on replacing my center console to match my open-pore black ash wood trim. My SA said that as an expression of customer goodwill that they would do it at cost, which he said is $580. So although many are doing this as a DYI, I am just going to have the dealer do it. I just don't want to risk a screw-up and end up having to spend more time than necessary. I am also making mental notes of some minor UI changes in the 2018 model year over my 2017 and will share in a follow-up post later.
I just completed updating my 2017 E, replacing the piano black console with the brown ash open pore trim pieces. Everything went well except for getting all the plugs out of their sockets. Guess I was being extra cautious not wanting to break any of those guys. I DID have problems getting the ambient lighting tube disconnected from both LEDs. The LED housing came apart ok, but I couldn't get the pieces the LEDs attach to off of the ends of the plastic light tube that runs around the perimeter of the trim piece. Ended up just popping out that entire tube and transferring it to the new trim piece. Wasted 10 times more time trying to get the sockets off the tube than it did to just swap the whole thing.
When I ordered the parts from my MB dealer, the parts guy used the VIN and told me there would be two pieces, which I figured was the console trim and cup holder cover. The price of one was $636 and the other one, listed as 'cover' was $196. When I picked up the parts, there were two boxes, both the same size. Opening one, it had the console trim AND the cupholder piece with matching trim. The other box had another console trim piece and it's matching cupholder cover. However, the console cover had a finished cutout, a half circle, down at the touch controller end of the console. It looks like it might have been for a car that needed a cutout for someone's fingers to reach down and release the latches for the console storage doors. The E's use a pushbutton to open the doors, not a pull up latch, so I'm not sure what MB this would have been for. Needless to say that box went back to MB, along with a message from the parts manager that MBs parts system might be a little screwed up. )
Part number for the Natural Grain Brown Ash wood trim piece (and cupholder cover) is A 213 680 23 07 in case anyone needs it. I couldn't find it in this thread, and MB parts departments use the VIN anyway.