Vibration front brake. Turning rotors ?
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: Norway
Posts: 45
Likes: 0
Received 5 Likes
on
1 Post
Mercedes 1971 W107, W210, W211 2007 E200 k, W213 AMG sedan 2017 modell
Vibration front brake. Turning rotors ?
Mercedes E W 213 2017. P3 big front brake rotor. 18000 km (11100 miles) on the clock.
I have little vibration on the front brake when I drive the car in distronic mode and brake slow at low speed.
I like to turn the rotors. I have turning machine for that. Can it be done on this car?
Can I take the caliper / rotors out of the car without get some error/red light on the instrument panel?
I have little vibration on the front brake when I drive the car in distronic mode and brake slow at low speed.
I like to turn the rotors. I have turning machine for that. Can it be done on this car?
Can I take the caliper / rotors out of the car without get some error/red light on the instrument panel?
Last edited by Arvid; 05-08-2018 at 05:51 PM.
#2
Out Of Control!!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
If you don't have Xentry then disconnect the electronics for the brake system and if you turn the rotors make sure you know the thickness tolorances!!
#3
Member
Yes, I would clean up the rotors then “mic” the thickness to ensure within rotor spec. Then put a non directional finish on them then wash with detergent.
Robert
Robert