W213 Switched Fuse for Hardwiring Dashcam/Radar Detector/etc.
#1
Member
Thread Starter
W213 Switched Fuse for Hardwiring Dashcam/Radar Detector/etc.
Hello all,
I am looking for a suitable fuse in the front interior of the car (either the fuses in the passenger footwell or the fuses in the side of the dash) that can be used for hardwiring devices - one that is powered on when the engine is on, and powers off when the engine is switched off - in my 2019 W213
does anyone know of a suitable fuse number that does this?
thanks
I am looking for a suitable fuse in the front interior of the car (either the fuses in the passenger footwell or the fuses in the side of the dash) that can be used for hardwiring devices - one that is powered on when the engine is on, and powers off when the engine is switched off - in my 2019 W213
does anyone know of a suitable fuse number that does this?
thanks
Last edited by SunnyC257; 02-19-2020 at 06:31 AM.
The following users liked this post:
SunnyC257 (02-19-2020)
The following users liked this post:
SunnyC257 (02-19-2020)
#5
Super Member
I used the 12V outlet under the dash on the passenger's side. The fellow who was comfortable running the wiring there was not comfortable actually cutting into any MB wiring, so this worked well.