Barbantus

I'm selling my 190E 16v Turbo Manifold. It's setup to run a T3/T4 sized turbocharger. It has an external wastegate port for a 35mm wastegate. This is not a cheaply made manifold. I had this custom made at my performance shop. The manifold had to be designed from scratch. It was CNC Matched, Tig Welded, and made of T304 Stainless Steel. I tested the manifold on my 190E 16v with a T3 Turbo on low boost. It was only run for a couple days. As I did not have any type of fuel management. I recently got my hands on a M104 C36 engine and decided to go that route rather than turboing my 2.3 16v. This manifold cost me $1,200 to have made so please don't try to lowball me. I'm asking $900 for the manifold. Let me know if you have any questions.

Logan

OJwerks

looks like a very nice piece... but good luck getting 900 for it.

Barbantus

Anybody that wants to turbo their 190E 16v will have a hell of a time finding a manifold. They will most likely have to have it designed & fabricated. I paid $1,200 to have this made. So $900 is a steal, the hard part is already done. Find me another beefy turbo manifold of this quality (Thick T304 Stainless Steel, Tig Welds, External Wastegate) for a 190E for cheaper and I'll lower my price.

rayrayr9

Hey Logan thats a cool manifold if it is still avalable i will be interested in it please give me a call 718 679 5659 or email me at rayrayr9@gmail.com asap. thanks Horace

turbobenz

I hate to thread dig but......I was the one who had the manifold made.It was made by forum member Evo2turbo. I spent the time polishing it. The head flanges are cnc but that is it. I needed money and sold it to Barbantus. The internet.....any one can make a claim.

Asafa Powell

Please email me at powpow980@yahoo.com about how to purchase manifold.