Mark this thread as Unsold
FS: C32/SLK32 Code3 pulley with gatorback belt and ULTIMATE SL55 intake!!!!! 50whp
12-23-2009, 10:03 PM
#1
Member
Thread Starter
Join Date: May 2008
Location: Dallas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
CL 600
FS: C32/SLK32 Code3 pulley with gatorback belt and ULTIMATE SL55 intake!!!!! 50whp
I am selling my Code 3 pulley with shims and gatorback belt for $375 shipped.
The SL55 intake includes 3" aluminum tubes w/ devil horn intake scoops, the driver side transitions from 2.5-3" so it will pass clear through your core support. This same pipe has been modified to fit much better than how it came. The SL55 boxes have been custom fitted with brackets so that it actually snaps down onto the factory provisions. All this fitting took about 10 hours and im pleased to say its what i consider damn near perfection. Please be advised i opened my core support up on each side by trimming the openings so that both tubes pass through with zero restriction. I mean perfectly round holes. If you are not willing to trim yours you might have trouble passing the tubes through. I have over $660 in parts not including any labor. I will let it go for $525 shipped. Keep in mind i built this for an srt6 so i cant garuntee the tubes fit on c32/slk32.
The SL55 intake includes 3" aluminum tubes w/ devil horn intake scoops, the driver side transitions from 2.5-3" so it will pass clear through your core support. This same pipe has been modified to fit much better than how it came. The SL55 boxes have been custom fitted with brackets so that it actually snaps down onto the factory provisions. All this fitting took about 10 hours and im pleased to say its what i consider damn near perfection. Please be advised i opened my core support up on each side by trimming the openings so that both tubes pass through with zero restriction. I mean perfectly round holes. If you are not willing to trim yours you might have trouble passing the tubes through. I have over $660 in parts not including any labor. I will let it go for $525 shipped. Keep in mind i built this for an srt6 so i cant garuntee the tubes fit on c32/slk32.
12-24-2009, 08:48 AM
#2
MBWorld Fanatic!
Join Date: Sep 2008
Location: murfreesboro,tn
Posts: 3,152
Likes: 0
Received 0 Likes
on
0 Posts
2003 porsche 996 turbo
just a note 240m3srt. i have the devil horns on my slk32. to get them to fit i needed to notch the horns becuase of the mounting points for the grille. different from the srt-6. not a big deal but thought you might want to know.
i might could use the belt if you want to sell it separete
also pack the intake very carefully! the mount clips break in shipping. 2 broken for me so far! now have my 3 on the way
gl with the sale!
i might could use the belt if you want to sell it separete
also pack the intake very carefully! the mount clips break in shipping. 2 broken for me so far! now have my 3 on the way
gl with the sale!
12-24-2009, 11:50 AM
#3
Member
Thread Starter
Join Date: May 2008
Location: Dallas
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
CL 600
just a note 240m3srt. i have the devil horns on my slk32. to get them to fit i needed to notch the horns becuase of the mounting points for the grille. different from the srt-6. not a big deal but thought you might want to know.
i might could use the belt if you want to sell it separete
also pack the intake very carefully! the mount clips break in shipping. 2 broken for me so far! now have my 3 on the way
gl with the sale!
i might could use the belt if you want to sell it separete
also pack the intake very carefully! the mount clips break in shipping. 2 broken for me so far! now have my 3 on the way
gl with the sale!
The belt is yours...PM me if you like.
