Mark this thread as Unsold
W211 E55 Long Tube Headers & Mid Pipe
04-26-2011, 10:48 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2009
Location: Knoxville, TN
Posts: 394
Likes: 0
Received 2 Likes
on
2 Posts
E55, Supercharged Z4 (sold)
W211 E55 Long Tube Headers & Mid Pipe
Up for sale is a set of long tube headers and mid-pipe for a w211 E55 amg. These were made by Floored Fab in AZ. They've never been installed and mostly just sat in the original box, hence the reason I'm selling them.
I also have a stock pulley I'll throw in if the buyer wants. You can send it off to ASP in TX and have then turn it into a 175, 180mm etc for around $350 (last time I checked). Asking $2,000 plus shipping for the set.
They have a black jet hot coating and are ready to go. No reason to wait several months to get some added power.
Contact me at lukemichaluk@yahoo.com for the fastest response.
The headers have bungs for wideband O2 sensors in the collectors. I also have the data logging equipment (zeitronix) that I could sell if somebody wanted. I will probably make a thread for that as a seperate item. That includes the zeitronix box, wideband O2 sensor, boost sensor, IAT sensor and DashDaq.
Email me for any questions.
I also have a stock pulley I'll throw in if the buyer wants. You can send it off to ASP in TX and have then turn it into a 175, 180mm etc for around $350 (last time I checked). Asking $2,000 plus shipping for the set.
They have a black jet hot coating and are ready to go. No reason to wait several months to get some added power.
Contact me at lukemichaluk@yahoo.com for the fastest response.
The headers have bungs for wideband O2 sensors in the collectors. I also have the data logging equipment (zeitronix) that I could sell if somebody wanted. I will probably make a thread for that as a seperate item. That includes the zeitronix box, wideband O2 sensor, boost sensor, IAT sensor and DashDaq.
Email me for any questions.
Last edited by Luke_M; 04-26-2011 at 01:33 PM.
04-26-2011, 03:27 PM
#3
Super Member
Join Date: Apr 2010
Location: Bay Area, CA
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
E55 AMG, 72' Toyota Carina, 63' Ford F100, 72' Mercedes 250c, 15' Harley Davidson Softail
04-27-2011, 12:44 AM
#7
MBWorld Fanatic!
Join Date: Apr 2008
Location: Arizona
Posts: 2,540
Likes: 0
Received 4 Likes
on
4 Posts
2004 E55, 1997 E320 "Sold"
Up for sale is a set of long tube headers and mid-pipe for a w211 E55 amg. These were made by Floored Fab in AZ. They've never been installed and mostly just sat in the original box, hence the reason I'm selling them.
I also have a stock pulley I'll throw in if the buyer wants. You can send it off to ASP in TX and have then turn it into a 175, 180mm etc for around $350 (last time I checked). Asking $2,000 plus shipping for the set.
They have a black jet hot coating and are ready to go. No reason to wait several months to get some added power.
Contact me at lukemichaluk@yahoo.com for the fastest response.
The headers have bungs for wideband O2 sensors in the collectors. I also have the data logging equipment (zeitronix) that I could sell if somebody wanted. I will probably make a thread for that as a seperate item. That includes the zeitronix box, wideband O2 sensor, boost sensor, IAT sensor and DashDaq.
Email me for any questions.
I also have a stock pulley I'll throw in if the buyer wants. You can send it off to ASP in TX and have then turn it into a 175, 180mm etc for around $350 (last time I checked). Asking $2,000 plus shipping for the set.
They have a black jet hot coating and are ready to go. No reason to wait several months to get some added power.
Contact me at lukemichaluk@yahoo.com for the fastest response.
The headers have bungs for wideband O2 sensors in the collectors. I also have the data logging equipment (zeitronix) that I could sell if somebody wanted. I will probably make a thread for that as a seperate item. That includes the zeitronix box, wideband O2 sensor, boost sensor, IAT sensor and DashDaq.
Email me for any questions.
Trending Topics
04-27-2011, 09:38 AM
#8
Former Vendor of MBWorld
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes
on
242 Posts
2003 W211 E55, 2003 W220 S600
i can get a asp 185 crank pulley, water pulley and belt for 800 shipped. Yes when you receive your new pulley you would have to send me your core back in good faith.
Last edited by shardul; 04-28-2011 at 12:08 PM.
04-27-2011, 01:18 PM
#9
Senior Member
Thread Starter
Join Date: Mar 2009
Location: Knoxville, TN
Posts: 394
Likes: 0
Received 2 Likes
on
2 Posts
E55, Supercharged Z4 (sold)
Dang, well I guess they went up? Sorry for any confusion but I thought for sure that about a year ago I could get my stock pulley converted into a larger one for around $350.
Anyway, the main point is that the headers and mid-pipe are up for sale. Thanks for clearing it up though guys.
Anyway, the main point is that the headers and mid-pipe are up for sale. Thanks for clearing it up though guys.
05-04-2011, 08:17 AM
#17
Senior Member
Thread Starter
Join Date: Mar 2009
Location: Knoxville, TN
Posts: 394
Likes: 0
Received 2 Likes
on
2 Posts
E55, Supercharged Z4 (sold)
These have never been installed or even left the building. Pulled them out of the box about a year ago and put them right back in. I'm selling the E55 now so I don't need these.
I paid $2,220 for the headers and mid pipe (plus shipping) and waited a few months. $2,000 and they are in your hands in a few days. No more complaints
Also should add the Chris stated that the mid-pipe, x-pipe, whatever, is the key component here. Cats or straight pipes is up to you but the mid-pipe creates the venturi effect that you want.
Lukemichaluk@yahoo.com
I paid $2,220 for the headers and mid pipe (plus shipping) and waited a few months. $2,000 and they are in your hands in a few days. No more complaints
Also should add the Chris stated that the mid-pipe, x-pipe, whatever, is the key component here. Cats or straight pipes is up to you but the mid-pipe creates the venturi effect that you want.
Lukemichaluk@yahoo.com
Last edited by Luke_M; 05-04-2011 at 08:50 PM.
