Mark this thread as Unsold
550cc EV14 injectors
#1
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
550cc EV14 injectors
These are the exact same injectors used in the looped fuel rail kits. They are made for multi valve engines (2 intake ports). They are 6 hole injectors and have a wider spray pattern to atomize the fuel better and get fuel thru each intake valve. These injectors are new and come with the pigtail adapters also. $450 shipped in US.
Last edited by e55amgrocket; 01-22-2012 at 03:28 PM.
Trending Topics
#9
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
They will fit on a 2006 CLS. It takes about 20-30 minutes to install them. Take off your engine covers. Remove the surge tanks. Disconnect the fuel line with a 17mm wrench. Take the inverted 4 torx that hold the rail down off. Unplug the injector connectors then gently pry the rail up. Make sure you get all the old orings out then put the new injectors in the manifold first (I use silicon on the oring to help them slide in) then line the rail up on the injectors and push it down flat and put everything back together. It's not a bad job at all.
#14
Member
Price picked up? This doesn't require and rewiring of clips, right? I will most likely have Larry throw these in along with my Eurocharged kit. Thanks.
Last edited by ziggityzen; 03-12-2012 at 06:38 PM.