Mark this thread as Unsold
FS: ROW airboxes C63/M156
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Toronto, Canada
Posts: 31
Received 0 Likes
on
0 Posts
2011 C63
FS: ROW airboxes C63/M156
Bought a set of ROW airboxes that I don't need anymore, previous owner colored in the AMG logo on them though
Asking $250 USD + shipping & paypal fees.
Asking $250 USD + shipping & paypal fees.
#6
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Toronto, Canada
Posts: 31
Received 0 Likes
on
0 Posts
2011 C63
#7
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,728
Received 798 Likes
on
548 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
The sensors will physically fit, but from what I'm told by an AMG tech is that they're not the same between the NA and ROW boxes (which is likely why every ROW box kit includes them). If they were the same, I would have picked these up weeks ago.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Toronto, Canada
Posts: 31
Received 0 Likes
on
0 Posts
2011 C63
BTW Diabolis, couldn't you swap the sensors from your cracked lid onto these ones? Or is the sensor itself damaged?
#9
MBWorld Fanatic!
Join Date: Jan 2013
Location: Toronto, Canada
Posts: 3,728
Received 798 Likes
on
548 Posts
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, C5 Z06 & IS300 race cars, EQE 4Matic+ on order
Hey Galen,
I cracked one of my lids in a moment of idiocy while I was tryign to get in there with a strut brace still attached, but I don't have ROW boxes - I have the NA ones (and thus NA MAFs). I was hoping to simply swap the MAFs and essentially kill two birds with one stone, but one of the AMG techs that I asked apparently passeed the info higher up the food chain, and the answer that came back was that the lids and MAFs are both different for the ROW boxes (something to do with the air flow through the opening on the lid, which is different between the two). I did not inquire any further, but if the MAFs are sold separately, maybe someone can check the part numbers for the NA and ROW MAFs themselves and either confirm or deny what I was told... if what I was told is wrong, I still want them.
Cheers,
Doug
I cracked one of my lids in a moment of idiocy while I was tryign to get in there with a strut brace still attached, but I don't have ROW boxes - I have the NA ones (and thus NA MAFs). I was hoping to simply swap the MAFs and essentially kill two birds with one stone, but one of the AMG techs that I asked apparently passeed the info higher up the food chain, and the answer that came back was that the lids and MAFs are both different for the ROW boxes (something to do with the air flow through the opening on the lid, which is different between the two). I did not inquire any further, but if the MAFs are sold separately, maybe someone can check the part numbers for the NA and ROW MAFs themselves and either confirm or deny what I was told... if what I was told is wrong, I still want them.
Cheers,
Doug