Originally Posted by bibby1131

Hi there,
I just got a 2020 G63 and interested with the wheels you provided, can I further ask following questions before making decision?

1. My factory spec of the wheel is 21x10J, ET33, 285/45R21
2. If I run with your suggestion, 20x9.5J, ET35+20mm spacers (which equals to ET15), 295/55R20; will it rub the outer plastic wheel arch?

Originally Posted by 3WD

Hello,

Here's your reply:
1. My factory spec of the wheel is 21x10J, ET33, 285/45R21
2. If I run with your suggestion, 20x9.5J, ET35+20mm spacers (which equals to ET15), 295/55R20; will it rub the outer plastic wheel arch? 463 Industries actually now offers a 20x9.5 +20 for the G63 fitment so no needed spacers. We suggest going with a 285/50/20 with no rubbing issues at all. Anything above a 50 series tire will rub the inner fender lining.

Please let us know if you have any more questions.

Originally Posted by bibby1131

adding one more question
3. if I run them (20x9.5J ET20; 295/55R20) with additional 10mm spacers, will it also rub the inner lining?

Originally Posted by 3WD

Hello again,

Never tried that setup before, but it's not the width of the tire that causes the rubbing, it's the height (55 series).

​​​​​Hope that helps you answer your questions.

Thank you!

Originally Posted by bibby1131

Hi there,

thanks for quick feedback
Just to check with your original post’ spec
>>> 285/55R20, 20x9.5J +35 with -20mm spacers

is that the right spec of your original post setup?
if yes, will that car also rub the inner linning?

Originally Posted by 3WD

​​​​​​Hi,
this spec was given to us by our customer. We didn't ask if it rubbed or not, sorry.
This customer in particular didn't mind rubbing or trimming the inner lining, we know that.

Thank you again!

Originally Posted by bibby1131

Hi there,

thanks for clarifying!
and since your original post got a little large tyres (285/55 vs. 285/50), also sits more protrude (ET35-20 vs. ET20)

could you provide some picture of G 63 FL wearing 285/50R20 with 9.5J +20mm setup

thank you

Originally Posted by 3WD

Hello again,

Pain of **** they can be but not point of true beadlock unless you're gonna flying through the Mojave desert or drive on super low tire pressure.

1. The wheels are stain black finish
2. Wheels are $3580 for the set
3. To refinish the ring a different color is $400 for the set, but we can do it for $200.
4. The wheels will rub the inner plastic lining either at full clock turn or in some case at a weird angles. With the few edition 1 we've done with this exact same setup, absolutely no issues at all. But the G550 slightly narrow fenders, so rubbing is on inner lining.

Please let us know if you further questions.

Thank you!

Originally Posted by Prince1975

Hi guys … so what’s the current price of complete set of wheels + BFG tires ? 285/50/20 + 20mm spacers ??