2021 Aftermarket Build
#26
I had these matt black carbon fiber covers made......There was nothing online to help me to remove the existing plastic ones so I took a chance.....They actually pop off very easily and the replacements snapped right into place (with a little patience) The blinker piece is removed with two screws and when reinstalling you must align the cover to slide onto the connector. Easy DIY in 30 minutes. Covers were $300
Original covers
Replacement covers
Installed Covers
Fitment Closeup
Original covers
Replacement covers
Installed Covers
Fitment Closeup
The following users liked this post:
The Butcher (11-02-2021)
The following 2 users liked this post by The Butcher:
PeriodCorrect (12-10-2021),
Theatrix1 (11-02-2021)
#28
Had an opportunity over the New Year to drop the vehicle off and have the front and rear diffusers installed along with the remainder of the interior carbon fiber. The carbon fiber is a matt black dry carbon. Was hoping for the hood scoop, light bar and rear spoiler to be installed as well however the tuner was not informed by me that the vehicle had ceramic so they chose not to install until the ceramic has been removed from these areas.
#29
Had an opportunity over the New Year to drop the vehicle off and have the front and rear diffusers installed along with the remainder of the interior carbon fiber. The carbon fiber is a matt black dry carbon. Was hoping for the hood scoop, light bar and rear spoiler to be installed as well however the tuner was not informed by me that the vehicle had ceramic so they chose not to install until the ceramic has been removed from these areas.
looks nice.
how do the carbon interior pieces fit? Is it as snug as the original pieces ?
The following users liked this post:
Theatrix1 (01-20-2022)
The following users liked this post:
Theatrix1 (01-20-2022)