DAS Module Programming - option removal
Thread Starter
Newbie
Joined: May 2016
Posts: 5
Likes: 1
From: Scotland
GL 320 / SLK 55 AMG
DAS Module Programming - option removal
Hi,
Last year I replaced the CGW and coded in the relevant options.
However I coded in the Tire Pressure Monitor module, when in fact this is not present, after checking the VIN on mb data card.
Thus I've been plagued with Tire Pressure Monitoring inoperable messages on the instrument cluster.
Yesterday I remove the TPM coding option and even de activated the Tire Pressure Loss check, but I am still receiving the inoperable messages.
Despite reading back the CGW coded options again, which indicate the programming was successful.
Any pointers ?
Thanks
Last year I replaced the CGW and coded in the relevant options.
However I coded in the Tire Pressure Monitor module, when in fact this is not present, after checking the VIN on mb data card.
Thus I've been plagued with Tire Pressure Monitoring inoperable messages on the instrument cluster.
Yesterday I remove the TPM coding option and even de activated the Tire Pressure Loss check, but I am still receiving the inoperable messages.
Despite reading back the CGW coded options again, which indicate the programming was successful.
Any pointers ?
Thanks
