GL450 Cylinder Head Front Cover
#1
Junior Member
Thread Starter
GL450 Cylinder Head Front Cover
I was told a leak was probably the cylinder head front cover. I thought they meant the valve cover which looked like a lot of work. After looking further, it doesn't look like too big of a job. Couple questions:
1. I don't see a gasket on the drawings, is it just a sealer. What sealer is it, I'd like to order it online.
2. Sounds like I should also replace the bolts, P/N?
3. I cleaned everything pretty good and it looks like the oil might be coming from around the Cam Magnet. Is that a possibility? What is the seal behind that?
1. I don't see a gasket on the drawings, is it just a sealer. What sealer is it, I'd like to order it online.
2. Sounds like I should also replace the bolts, P/N?
3. I cleaned everything pretty good and it looks like the oil might be coming from around the Cam Magnet. Is that a possibility? What is the seal behind that?
#2
Out Of Control!!
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Join Date: Sep 2018
Location: unbegrenzt
Posts: 13,349
Received 3,937 Likes
on
3,100 Posts
2017 GLE350 4MATIC
I was told a leak was probably the cylinder head front cover. I thought they meant the valve cover which looked like a lot of work. After looking further, it doesn't look like too big of a job. Couple questions:
1. I don't see a gasket on the drawings, is it just a sealer. What sealer is it, I'd like to order it online.
2. Sounds like I should also replace the bolts, P/N?
3. I cleaned everything pretty good and it looks like the oil might be coming from around the Cam Magnet. Is that a possibility? What is the seal behind that?
1. I don't see a gasket on the drawings, is it just a sealer. What sealer is it, I'd like to order it online.
2. Sounds like I should also replace the bolts, P/N?
3. I cleaned everything pretty good and it looks like the oil might be coming from around the Cam Magnet. Is that a possibility? What is the seal behind that?
2. Yes replace the bolts, they are aluminum single use very low torque spec. Buy from the dealer.
3. Possible. Try messaging @crconsulting as he recently replaced sensors.
Last edited by chassis; 04-18-2022 at 10:28 AM.