Match Amplifier 5.4DSP Subwoofer Connection Issue
#1
Junior Member
Thread Starter
Join Date: Sep 2021
Location: San Jose, CA
Posts: 24
Likes: 0
Received 4 Likes
on
4 Posts
2020 GLC300 4matic, 2017 C300 4matic
Match Amplifier 5.4DSP Subwoofer Connection Issue
Hi there,
I just transferred match sound system from 2017 c300 to 2020 glc300. After installation, everythings working fine but woofer is sounding very weak. I checked connections and everything seemed fine.
Does anybody know if new generation headunits have factory crossover? Because match amplifier getting signals from headunit and transmitting to woofer with subwoofer out. I am guessing because of factory crossover maybe door speakers not getting low frequencies (lets say below 150 hz) so amplifier doesnt send below 150hz to woofer and sounds weak.
any ideas??
I just transferred match sound system from 2017 c300 to 2020 glc300. After installation, everythings working fine but woofer is sounding very weak. I checked connections and everything seemed fine.
Does anybody know if new generation headunits have factory crossover? Because match amplifier getting signals from headunit and transmitting to woofer with subwoofer out. I am guessing because of factory crossover maybe door speakers not getting low frequencies (lets say below 150 hz) so amplifier doesnt send below 150hz to woofer and sounds weak.
any ideas??
#2
MBWorld Fanatic!
Join Date: Oct 2009
Location: Colorado
Posts: 5,016
Received 1,650 Likes
on
1,219 Posts
'21 AMG53 wDPP & ARC, 19 GLC300 - Former- 10&14 ML BlueTecs, 20 GLE450 E-ABC, 15 Cayenne D, 17 Macan
Following
#3
Junior Member
Thread Starter
Join Date: Sep 2021
Location: San Jose, CA
Posts: 24
Likes: 0
Received 4 Likes
on
4 Posts
2020 GLC300 4matic, 2017 C300 4matic
I fixed it myself.
i used FL and FR output from headunit to amplifier FL and FR Input.
for woofer, I used bass output which is purple color from another socket behind unit to RL input of amplifier.
with dsp tool, I set input output routings like in picture. Now everythings working fine.
i used FL and FR output from headunit to amplifier FL and FR Input.
for woofer, I used bass output which is purple color from another socket behind unit to RL input of amplifier.
with dsp tool, I set input output routings like in picture. Now everythings working fine.