GLC43 Coupe Stock Exhaust Size?
Thread Starter
Super Member
Joined: Feb 2016
Posts: 697
Likes: 104
From: Taiwan
GLC43, X P100D, S P100D, CT200H
GLC43 Coupe Stock Exhaust Size?
Anybody know the stock exhaust pipe sizes of a non performance exhaust GLC43 Coupe?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
Super Member
Joined: Oct 2011
Posts: 690
Likes: 84
From: GA
X3 M40i
Anybody know the stock exhaust pipe sizes of a non performance exhaust GLC43 Coupe?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
The exhaust you mention from that guy will be a little bit larger than stock; however, why did he drop back down to 2.75 at the muffler when stock piping to the muffler is 3inch?
Junior Member
Joined: Jun 2017
Posts: 59
Likes: 18
2020 E63s - 2017 GLC43 AMG (Sold) - 2007 ML63 (Totaled)
Anybody know the stock exhaust pipe sizes of a non performance exhaust GLC43 Coupe?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
I am considering an aftermarket exhaust system and the seller replied to me that his pipe sizes are
[The size of the pipe is 2.75 x2 and then 3 inch and then 2.75 till mufflers.
Thanks,
We have the dyno chart in hand. It increases for 10 HP.]
Anybody wanna share any thoughts?
Thread Starter
Super Member
Joined: Feb 2016
Posts: 697
Likes: 104
From: Taiwan
GLC43, X P100D, S P100D, CT200H
I am having something custom made. It will be very similar to FI Exhaust's setup. dual Mid Pipes 60-63mm diameter into a electronically controlled valved muffler. It will be controlled by remote. I decided not to use the OBDII port to control the valves and I also decided to keep the stock dwnps.
It should be ready to install next week once it finishes fabrication.
It should be ready to install next week once it finishes fabrication.
Junior Member
Joined: Jun 2017
Posts: 59
Likes: 18
2020 E63s - 2017 GLC43 AMG (Sold) - 2007 ML63 (Totaled)
Post videos once installed if you wouldn't mind. Curious to see where the valved muffler is sourced from. Im tempted to take the muffler off and put straight pipes out the back but don't feel like having a pounding headache every time i drive and the times I don't want to be that a-hole with a loud *** exhaust.
