When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm about to order a BlackVue Dashcam, and there is an option to also order a fuse tap for a clean, hardwire installation. Does anyone know what type of fuse (ATO Fuse, Mini Fuse, or Low-Profile Mini Fuse) is the appropriate fuse tap to order?
Last edited by mr inkredibul; 04-07-2022 at 08:47 PM.
I believe it's ATO if you want to tap into a switched fuse. I used fuse location 447 which was for Right rear center console socket 12V. But I ended up using a different type of fuse tap other than the add-a-fuse that you will be getting with your dashcam.
I believe it's ATO if you want to tap into a switched fuse. I used fuse location 447 which was for Right rear center console socket 12V. But I ended up using a different type of fuse tap other than the add-a-fuse that you will be getting with your dashcam.
04-07-2022, 08:43 PM
