When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys- Sort of saw this answered in searching around, but wanted to be, "millimeter sure" on it. I'm wanting to go to a 21x10 ET45 square setup on my GLE 400/4Matic/AMG Line, but am worried about the fronts poking out beyond the front fenders. I know the 63's have that little extra fender lip that covers the extra 1" outward poke a bit. (24.7mm) I don't want an off-road truck stance, but am drooling over this set!
Currently running the 20x9 ET57 all around, Pirelli all-season's.
Based on my experience trying different wheels/offsets on GLE43 (same body as '16 GLE400), with 10" et45 wheels there should be no poke upfront (about 100% fender flush), however there will be a minimum (about 5mm or less) poke in the rear which is not very obvious (especially if one uses mug guards).
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
