Retrofitting Command Nav
Thread Starter
Newbie
Joined: Sep 2011
Posts: 3
Likes: 0
From: Houston, TX
QX56, 650i, F250KR
Retrofitting Command Nav
I am working on putting the full command nav system in our 2011 GLK. I found a GLK command unit on Ebay (there are lots of them) and everything went in great, until I got to the 7" screen, and the harness that supplies the power is different, does anyone know if there is an adapter or the wiring diagram for the 18 pin connector on the 7" screen so I can make one? To test the head unit I used the 5" screen with the new command unit and it worked, but you couldn't see the whole image so I am sure it is just a matter of getting power to the 7" screen. I have also added a back up camera which worked out great. I have attached a picture of the back of the 7" screen, any info or help would be greatly appreciated.
Thanks!
Thanks!
Junior Member
Joined: Aug 2012
Posts: 36
Likes: 6
From: Oregon
2014 ML350 Bluetec
Check out this thread from Marco Bussadore. It helped me immensely.
https://mbworld.org/forums/glk-class...se-camera.html
Pg
DD
https://mbworld.org/forums/glk-class...se-camera.html
Pg
DD
Super Member
Joined: Mar 2005
Posts: 932
Likes: 38
From: North of Boston
Steve is usually pretty good about answering these kinds of questions.
http://www.mbenznl.nl/
http://www.mbenznl.nl/
2011, benz, comand, command, glk, head, installation, mercedes, navigation, naxigation, retrofit, retrofitting, service, system, unit, x204
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
