bench seats problem
#1
bench seats problem
Hi I used the easy entry push button function on the bench seats of my car, however when trying to move the seat back, I can only move the seat back and not the back rest. Am I doing something wrong?
#2
Senior Member
The latch maybe stuck. Try moving the handle on lower part of the seat. Sometimes it gets stuck. Happened to me a few days after I got mine. Took it in and they fixed it. Happened to me on both sides.
#3
Thanks for the info, apparently the seat was not engaged fully (even though it clicked it when I folded it down). I pushed down onto the seat firmly and the back rest was released at that point.
#4
Junior Member
Ha, yes thats another faut I've had in ours. see 'th emost faults in a GLS' thread.
The 2/3 bench needs to be 'slammed' back or pushed hard on the inside edge to lock it & release the lock outs. Then the front seat will reurn to its original position.
even when mine is folded forward I get a dash warning saying its not locked.
The 2/3 bench needs to be 'slammed' back or pushed hard on the inside edge to lock it & release the lock outs. Then the front seat will reurn to its original position.
even when mine is folded forward I get a dash warning saying its not locked.
The following users liked this post:
Zandorf2000 (12-01-2016)