BobSandra

Purchased the EBC (Red stuff) pads for the DW's 550. Is there anything this old wrench twister needs to be aware of before starting, ie wear sensors, sliders etc.

Thanks
Bob

chassis

MB front brakes are dead easy.

Don’t grease the pins, simply check they move smoothly.

Replace pin screws and caliper-knuckle screws.

Thin open end wrench is needed to back up the pin screws.

Replace the wear sensor, there is only one per axle.

BobSandra

Thanks just what I wanted to hear...new sensors are on the way from Autohaus AZ.
Bob

mikapen

One of my favorite sources, as well.

LeadfootCJ7

Are you replacing the rotors as well?

BobSandra

No