>>>PRICE UPDATE!!! AS OF 01/05/10 ALL PRICES HAVE BEEN REDUCED!!!!! WE NOW HAVE THE LOWEST PRICES ON THE INTERNET ON REAL GENUINE 3M DI-NOC FILM!!!!!<<<

One of SEMA 2009's most coveted new product was the carbon fiber vinyl from 3M, called 3M DI-NOC.

Q: So what is that carbon fiber vinyl?

A: Contrary to what has been seen over the years, the 3M DI-NOC vinyl is NOT a printed pattern, but in fact a TRUE 3-dimensional pattern that looks just like dry carbon fiber! Viewing it at ANY angles, you will see light reflecting off of it as it it were true carbon fiber weaves, for that priceless look!

Q: What makes the 3M DI-NOC so special?

A: First, it's nothing like what has been seen in recent years! The last time I had personally seen a similar product, it was based on a fabric. It was as if you had a cloth sheet, which meant it was impossible to apply perfectly on curvatures, it required copious amounts of gooey adhesive and, unless you had a perfectly flat surface, you were left with a cheap looking finish. Then you have those cheesy vinyl sheets (same used for decals) with a printed photo of CF. Is this really something you want on your car?

Where the 3M DI-NOC differs is in its ability to stretch and conform to curvatures, sharp edges, corners and the likes, with simply the aid of a hair dryer or heat gun. Nothing else! It also has a patented backing which allows for air stuck in air bubble to escape easily when pushed out, so you don't risk messing up!



Q: What can I apply it on?

A: Pretty much anything and everything? Of course, with automotive use, the options are endless! You can finally cover that ugly wood trim, door handle, etc. But even better, you can use it on the outside! Hood? Roof? Mirrors? You can wrap it all! Remember those pesky chrome strips that go around your windows? Wrap them up! Your door pillars? Wrap them up! Mirror Covers, diffuser, lips etc, the possibilities are endless!!!! I've even done my iPhone!

3M says that the film has a 4 years outdoor and 12 years indoors lifespan! Best of all, if anything happens to it, you can replace it! And guess what? The film itself does not require any special care! You wash it normally with (non abrasive) soap and water. Nothing fancy!

(IMPORTANT NOTE: Removal *may* damage the substrate, ie, the surface it's applied on. Furthermore, ONE Autosport, nor 3M offer any guarantee or warranty on the product. All sales are final, no refunds or returns accepted)


The film comes in a roll. We offer various size for various projects and budgets! There is something for you out there!

If you want a sample to see what it looks like and how it work, you can purchase a 4" x 8" sheet for $10 with free shipping. We're confident that once you see it for yourself, you will want to order rolls of it!

At this time, we only offer matte black, but we can also obtain silver, white, tan, brown and gray in full rolls. Email us for more information on other colors.

And as always, if you have any other questions, feel free to ask!

To order, use the PayPal links below! Shipping is $14.99 flat per rolls ordered. If quantity is ordered as a single roll, shipping applies only once (free shipping for sample size). Please specify if you want separate rolls or a single roll. Remember that separate rolls carry their own $14.99 shipping costs.

Please use a PayPal confirmed address for shipping.

For international shipping quote, please contact us via PM or email at sales@oneautosport.com

Thank you!

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 12" x 12" SAMPLE UPDATED LARGER SIZE NOW!!
$10, with free shipping!

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 12" x 48" (4 sq/ft)
$29.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 24" x 48" (8 sq/ft)
$49.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 36" x 48" (12 sq/ft)
$74.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 48" x 48" (16 sq/ft)
$99.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 60" x 48" (20 sq/ft)
$124.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 72" x 48" (24 sq/ft)
$149.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 84" x 48" (28 sq/ft)
$174.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 96" x 48" (32 sq/ft)
$199.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 108" x 48" (36 sq/ft)
$209.99

---------------------------------------------------------------
3M DI-NOC MATTE CARBON FIBER 120" x 48" (40 sq/ft)
$219.99

Here are a couple of pics of the film by itself and a pic of my iphone cover wrapped in 3M DI-NOC film!







Alright, enough talk, let's see some picture of that installed on cars!



Here's a roof!






A shifter base:



Even a laptop!



Here are is a video that show the 3M DI-NOC film on a Honda Civic:

http://www.youtube.com/watch?v=UaQawlBrh8M

 

Do you have pics of the brown carbon fiber

 

It's hard to capture the colors. The brown is...well brown! It's the one on the rightmost in the photos:

 

yo negro, send me some free 3M 'samples'

 

ttt

 

So I ordered some of this from you guys almost 1 month ago. Where is it.

 

What's your name and email address, I'll look up your order. Also, how much did you order?

EDIT: Thomas right? It was sent a while ago. It was the $10 sample piece. If you don't get it by the end of this week, let me know, but you should have already had received it. It was sent in a bubble wrap yellow envelope.

 

Will do. Thanks for the quick response!

 

ordered!!!

 

Received your along with others. Thank you!

 

who would you recommend to install this in the SF bay area?

 

What do you want to do with the film exactly?

 

This stuff is actually pretty fun to work with. Bought a small piece from a web retailer & covered my OE reflectors. Just a little glow when the lights are on, and it looks pretty stellar when they're off, IMHO. The keys took about 5 minutes each to do. Super simple.

 

Look very cool! That's a good idea!

 

can you clear coat this stuff to give it a more shiny look???

 

No you can't, sorry.

 

is it easy to work with? is it forgiving?

 

In my experience: Yea - with a little heat (even from a hairdryer) this stuff is super compliant & it will let you remove and reapply if you start to put in on off line.

 

i was thinking of ordering this for my wood interior and update it to "CF" you think it would look nice?

 

I think it's a perfect application for it. I would do it as a better and cheaper alternative to real CF wrapping!

 

your in california? is pick up an option?

 

Yes, we're in San Luis Obispo.

 

ordered sample roll. how long does shipping take usually for the largest one you have? and what about the shipping for sample time?

 

It'll ship out to you tomorrow morning. It normally ships the same day or next, depending on when the order was placed. If out of stock, you're immediately notified, and that usually means it adds a week to your order.

 

Got my order in!! looking forward to putting this stuff on my car.