Mark this thread as Unsold
Fs: Red Carbon Fiber Engine Start/Stop Button
#26
Super Member
#27
#28
Junior Member
If this was a "sticker", I would not have posted my pics. What I have is the exact same piece of real carbon fiber, without the oem button as Mike stated above. I'm just helping out fellow members not over pay for something they can put together themselves, but to each their own.
#29
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
I hope the sticker is REALLY adhesive because that is going to look horrible when it starts to peel from the heat.
#30
Sarcasm????? Double sided tape has come a long way, and the tape you get has a pretty high thermal limit for long term use (70C), I wouldn't worry about heat or losing adhesion. I went overkill and used an adhesive promoter plus a heat gun when I put mine on so its extra permanent but probably very unnecessary. You can always skip the tape and use a drop of silicone glue if you are super worried.
Last edited by Mikeki7; 07-03-2017 at 11:53 AM.
#31
Junior Member
lol I think Hyperion was referring to the 3m tape it comes with. I might just take the same route you did with adhesive promoter or just glue the damn thing. Thanks Mike
Sarcasm????? Double sided tape has come a long way, and the tape you get has a pretty high thermal limit for long term use (70C), I wouldn't worry about heat or losing adhesion. I went overkill and used an adhesive promoter plus a heat gun when I put mine on so its extra permanent but probably very
unnecessary. You can always skip the tape and use a drop of silicone glue if you are super worried.
unnecessary. You can always skip the tape and use a drop of silicone glue if you are super worried.
#32
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,687
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
Sarcasm????? Double sided tape has come a long way, and the tape you get has a pretty high thermal limit for long term use (70C), I wouldn't worry about heat or losing adhesion. I went overkill and used an adhesive promoter plus a heat gun when I put mine on so its extra permanent but probably very unnecessary. You can always skip the tape and use a drop of silicone glue if you are super worried.
#33
MBWorld Fanatic!
Or we could just let the guy sell his damn button in his own posting.
The following users liked this post:
C63fora2w1 (07-27-2017)
#37
Member
Type in search
- mercedes carbon push button
- Red For Benz CLS Class W218 Start Stop Engine Push Button Key Trim Carbon Fiber
- mercedes carbon push button
- Red For Benz CLS Class W218 Start Stop Engine Push Button Key Trim Carbon Fiber
Last edited by hotdognobun; 07-26-2017 at 10:43 PM.