Torsion Bars ML
#1
Super Member
Thread Starter
Join Date: Jun 2005
Posts: 512
Likes: 0
Received 2 Likes
on
2 Posts
04 S500, 05 Jeep GC, 06 Acura TL, 04 BMW 530i, 98 Jag xk8,
Torsion Bars ML
so i was lowering my ML the other day and i turned each bolt counter clockwise 4 turns which if i remember correctly is half an inch.. each turn = 1/8 of an inch..
Is turning counter clockwise correct?
If i was at the front of my car under it looking at the back of the car belly on the floor i would be pushing the wrench towards the back.. sorry if thats confusing but i want to be specific. Im wondering if i did it correctly. a half inch is pretty hard to notice..
Is turning counter clockwise correct?
If i was at the front of my car under it looking at the back of the car belly on the floor i would be pushing the wrench towards the back.. sorry if thats confusing but i want to be specific. Im wondering if i did it correctly. a half inch is pretty hard to notice..