Speed signal to Command 2.0
Thread Starter
Newbie
Joined: Oct 2006
Posts: 12
Likes: 0
From: NORWAY
98 mod. ML320 Brabus
Speed signal to Command 2.0
What do I need for to get the speedsignal from a 98 mod ML to a 2001 mod. Command system, and where to buy the accessories??
The speed and reverssignal is not present in the A plug today.
The speed and reverssignal is not present in the A plug today.
Newbie
Joined: Nov 2006
Posts: 7
Likes: 0
@Janni
You need three parts to do the installation.
1. Part No B67822519
2. B67822596
3. B67822594
The colour of the speed pulse cable in the canbus connector is White/Green
Forget about the reverse wire , its not essential to the working of the system.
Good Luck
You need three parts to do the installation.
1. Part No B67822519
2. B67822596
3. B67822594
The colour of the speed pulse cable in the canbus connector is White/Green
Forget about the reverse wire , its not essential to the working of the system.
Good Luck
Thread Starter
Newbie
Joined: Oct 2006
Posts: 12
Likes: 0
From: NORWAY
98 mod. ML320 Brabus
The BorgWarner transfer case controller contains the speed signal, on what pin??
Last edited by janni; Dec 27, 2006 at 01:49 PM.
Thread Starter
Newbie
Joined: Oct 2006
Posts: 12
Likes: 0
From: NORWAY
98 mod. ML320 Brabus
