SRS Light after mirror install
Thread Starter
Newbie
Joined: Jul 2006
Posts: 5
Likes: 1
From: Toronto, ON, CA
2000 ML320
SRS Light after mirror install
I installed a set of mirrors with LEDs as my original passenger mirror was damaged backing out of the garage. I had originally unplugged the main plug on the drivers door to see if I could run the wires for the mirror beside the plug, but quickly abandoned the idea and used a different hole. The mirror installation went extremely well, except for the SRS light which is now appearing. Is this light the result of unplugging this said plug, or might I have accidentally unplugged something in the driver/passenger door? There is nothing obvious, both airbags are plugged in, and I didn't drill or cut any of the existing wires in the door to install the mirrors. Anything else to check?
Newbie
Joined: Apr 2008
Posts: 15
Likes: 0
2005 sl500-2002 ml500-1998 sl500
SRS LIGHT AFTER MIRROR INSTALL ALSO
I ALSO HAD TO HAVE RIGHT MIRROR INSTALLED BEING DAMAGED FRON HEAVY WIND STORM BROKE RIGHT MIRROR- NOTHING WAS DONE TO ANY OTHER WIRING IN PASSENGER DOOR.
SOMEONE OUT THERE HAVE AN ANSWER
SOMEONE OUT THERE HAVE AN ANSWER
