M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

Shimmy question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-16-2010, 08:45 PM
  #1  
Junior Member
Thread Starter
 
LMA1973's Avatar
 
Join Date: Mar 2010
Posts: 37
Likes: 0
Received 1 Like on 1 Post
1999 ML430
Shimmy question

My ML430 (only had it 3 weeks) runs like a champ. The only issue i have is that when i get up around 80 the front starts to shimmy. There is no alignment issue as i can take my hand off the wheel at any speed and she tracks as straight as an arrow. Also if i accelerate hard i can run up to 80 and beyond with no shimmy but when i let off the gass to cruise then it will. I did see that the previous owner just replaced the sway bar links.

Could this issue be as simple as unbalanced wheels? The tires are getting pretty worn and it wouldnt surprise me if they havent been rotated and balanced in a while.
Old 03-16-2010, 09:21 PM
  #2  
Senior Member
 
Benzo 003's Avatar
 
Join Date: Sep 2009
Location: Chicagoland
Posts: 361
Likes: 0
Received 3 Likes on 2 Posts
2008 ML350 4matic
I would definitely be thinking tires....out of round, out of balance, or even cupping....just went through this with a set of Goodyear Assurance tires on a differnet vehicle. The right side tires were cupped and I never felt it until 75 mph or so.....
Old 03-16-2010, 09:26 PM
  #3  
Junior Member
Thread Starter
 
LMA1973's Avatar
 
Join Date: Mar 2010
Posts: 37
Likes: 0
Received 1 Like on 1 Post
1999 ML430
Thanks man-i"ll start there!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Shimmy question



All times are GMT -4. The time now is 03:06 PM.