M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

A-Pillar Lining

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 4, 2010 | 02:16 AM
  #1  
missthebus's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2002
Posts: 15
Likes: 0
From: BayArea
02ML320
A-Pillar Lining

What do you guys/gals use to glue the lining back on the A-pillar?

Thanks
Reply
Old Jun 4, 2010 | 06:50 PM
  #2  
azinn's Avatar
Senior Member
 
Joined: May 2003
Posts: 398
Likes: 1
From: In A Van Down By The River
2014 RX 350 F Sport, 2007 Scion tC, 2000 ML 430 Money Pit Finally Gone! Oh Happy Day!
Originally Posted by missthebus
What do you guys/gals use to glue the lining back on the A-pillar?

Thanks
I used a glue stick from Walmart. Goes on purple so you can see where you put the glue and dries clear. Never had any more problems with it coming loose. My 2 cents.
Reply
Old Jun 5, 2010 | 06:23 PM
  #3  
missthebus's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2002
Posts: 15
Likes: 0
From: BayArea
02ML320
I actually done it a few days ago, as good as new.
How does the glue stick holding up? I went with the glue spray.

In case anybody interested.
Removal: Grab the top and pull straight out parallel to the windshield.

Tool/Glue: Credit card/Squeegee
3M 77 Multipurpose glue spray (walmart)

Install: Peg in the bottom and snap in the top.
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:55 PM.