M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

ML 400 CDI Injector fault message

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-02-2011, 06:45 AM
  #1  
Newbie
Thread Starter
 
NAMIKI's Avatar
 
Join Date: Nov 2011
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
ML 400 CDI
Lightbulb ML 400 CDI Injector fault message

Around 200.000 km oil level light warning appeared. Noticed oil on Turbo hose and repaired both turbo's. After running the car 50 km, engine stopped during rush hour and had to try 40 time to start again. Service tested the car and said all the injectors needed to be replaced due to the bad fuel. I replaced eigth of them but there is still an error on 7th injector although it is brand new.
I checked pressure level of all the pistons, looks OK
Tested cabling (sensors etc.), looks OK
Any hint may help me solve my problem
Thanks in advance

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: ML 400 CDI Injector fault message



All times are GMT -4. The time now is 11:36 PM.