2007 ml 320 cid wont start
Thread Starter
Newbie
Joined: Jan 2013
Posts: 2
Likes: 0
ml 320 cid 2007
2007 ml 320 cid wont start
Hi,
I have a 2007 ML 320 CID 4 matic, about 2 months ago i tried to start the ml after driving it for while and it would not start. I called for a tow and while waiting about an hr later i tried it and it started ! Its been fine until today did same thing but would not start. had it towed to dealer and the next morning it started for them. any ideas?
It cranks for the allotted time than stops cranking.
I have a 2007 ML 320 CID 4 matic, about 2 months ago i tried to start the ml after driving it for while and it would not start. I called for a tow and while waiting about an hr later i tried it and it started ! Its been fine until today did same thing but would not start. had it towed to dealer and the next morning it started for them. any ideas?
It cranks for the allotted time than stops cranking.
Last edited by djt1962; Jan 15, 2013 at 11:34 AM. Reason: more info
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 765
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
First of all you are on the wrong forum. You should be asking any future questions on the W164 forum.
https://mbworld.org/forums/m-class-w164-72/
What your problem sounds like is the Crankshaft Position Sensor needs replacing.
https://mbworld.org/forums/m-class-w164-72/
What your problem sounds like is the Crankshaft Position Sensor needs replacing.
Thread Starter
Newbie
Joined: Jan 2013
Posts: 2
Likes: 0
ml 320 cid 2007
First of all you are on the wrong forum. You should be asking any future questions on the W164 forum.
https://mbworld.org/forums/m-class-w164-72/
What your problem sounds like is the Crankshaft Position Sensor needs replacing.
https://mbworld.org/forums/m-class-w164-72/
What your problem sounds like is the Crankshaft Position Sensor needs replacing.
Thanks for the help. As far as Wrong forum sorry
