M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

Help help help ml windows

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-22-2017, 06:16 AM
  #1  
Newbie
Thread Starter
 
Mcgoo1's Avatar
 
Join Date: Aug 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
ml 270 cdi 2001
Angry Help help help ml windows

So i had a problem with my drivers window on my 2001 ml after lots of pulling apart and testing found it to be a faulty relay the only place that was open to me on a sunday was the local scrap yard so off i went and got a relay now when i plugged the relay in there was a flash and a crack it shorted out straight away (faulty relay)so pulled it back out now the drivers window is working fine so took tge relay from there and plugged into the passenger side relay to check everything but nothing works not even the rear 2nd row windows took relay back out and tested drivers window and it works fine checked fuses and replaced fuses to be on safe side and still nothing checked power at the passenger side with test light and its dead no power at all has any one else had tgis problem as i cant think of where to go next apart from a gallon of petrol and a natch
Old 08-22-2017, 01:35 PM
  #2  
MBWorld Fanatic!
 
Maj. Dundee's Avatar
 
Join Date: Oct 2011
Location: Bronx, N.Y.
Posts: 7,107
Received 754 Likes on 702 Posts
2002 ML 320 & 2006 ML500
First of all please stop typing without using new sentences & paragraphs. Run-on paragraphs are very hard to read.

What window were you working on?

What relay did you remove and replaced with another?

What windows are not working now?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Help help help ml windows



All times are GMT -4. The time now is 07:40 AM.