M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

car starting problem

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Dec 12, 2019 | 05:53 PM
  #1  
shaman369's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2019
Posts: 52
Likes: 2
From: nj
2000 ml320
car starting problem

hello all, i have a 00 ml320 yesterday went to start vehicle and car was completely dead. so i got a jump and let it run for a while then drove home tried to restart after sitting for a while then dead again. so i been having to jump the car to start it. took it to auto zone they tested the battery and alternator and said it came up as being good even tho the worker who did it was dumb as rocks she almost hooked up the cables wrong if i dint tell her but i assume the machine was working good enough for the info.not sure what to do from here maybe a fuse or short circuit or something any ideas guys??
Reply
Old Dec 12, 2019 | 06:30 PM
  #2  
khomer2's Avatar
MBWorld Fanatic!
 
Joined: Nov 2015
Posts: 1,456
Likes: 140
From: Westcoast/Interior
02w163ML500 / 97w210E50AMG / 99w202C230k / 95w124500e-wip
Originally Posted by shaman369
hello all, i have a 00 ml320 yesterday went to start vehicle and car was completely dead. so i got a jump and let it run for a while then drove home tried to restart after sitting for a while then dead again. so i been having to jump the car to start it. took it to auto zone they tested the battery and alternator and said it came up as being good even tho the worker who did it was dumb as rocks she almost hooked up the cables wrong if i dint tell her but i assume the machine was working good enough for the info.not sure what to do from here maybe a fuse or short circuit or something any ideas guys??
How did they test it? Any printout showing results?
Find another shop to test the battery for a 2nd opinion.
You may have a parastic draw.
Not enough info to provide any other comment.
Reply
Old Dec 12, 2019 | 06:44 PM
  #3  
shaman369's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2019
Posts: 52
Likes: 2
From: nj
2000 ml320
no printout i will try another shop and get back
Reply
Old Dec 23, 2019 | 03:55 PM
  #4  
c32amg13's Avatar
Member
 
Joined: Jun 2003
Posts: 136
Likes: 9
From: Upland, CA
c32, c36, ml55, 95 W124 E320, 380sec, Vw mk1-turbo, H3, Porsche-C4, and Harley V-Rod
It could be the ignition control module. I thought it was the key fob, but it was that. As for Auto Zone. They don't knowS****. Bunch of lazy youngsters. I have an ml55, so should be same thing. $20 fix. Stealership $500
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:32 PM.