drivers window switch not working...help
Thread Starter
Almost a Member!
Joined: Mar 2004
Posts: 61
Likes: 0
From: ca
Ferrari,Bmw,Mercedes,Porsche
drivers window switch not working...help
Ok 1st problem with my awesome ML430....my drivers window does not want to roll up when I pull up on the window selector switch on the center arm console. How can I fix this ASAP. Can I replace this myself. I would assume that I will have to replace the entire window selection unit.....so what does that intale....can one remove the wood trim ? any tech. help will really help me out. Maybe someone knows if this a usual problem with the window switch.....thanks for your help... 
Thread Starter
Almost a Member!
Joined: Mar 2004
Posts: 61
Likes: 0
From: ca
Ferrari,Bmw,Mercedes,Porsche
Please can someone tell me how to change out this window switch problem. what do I have to take apart......its a ***** going thru drive-ups i.e bridge tolls......bank.....ect.
thx asap
thx asap
Member
Joined: Jun 2004
Posts: 153
Likes: 0
You have to remove the center console lid. should be push pins or screws depending on your model, then you remove the storage bucket, either push pins or screws, then your wood grain has to be pulled up. Older models have metal clips, newer models have two clips in the front and two T20 screws at the rear. After you do this you can remove the window switch control unit. The new ones have six T10 screws that have to be removed, the older model you will have to look at because I dont remember how to remove them. Hope this helps. Autogunner.
Newbie
Joined: Apr 2002
Posts: 15
Likes: 0
ML320
changing window switches
See this link for the removal and installation
http://www.grill.org/rodney/mclass/mlswitch/index.html
http://www.grill.org/rodney/mclass/mlswitch/index.html
