Springs
#1
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
Springs
In your opinion wich springs are better, Eibach, HeR, Brabus or Carlsson? I think Carlsson uses the HeR springs?! I would like to lower my ML320 CDI but I donīt want it too hard, it will have 20" wheels on 265/45-20 tires. Can someone help me with some experience on it.
#2
Senior Member
Join Date: Nov 2005
Location: South Florida
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
2006 ML500
Hi....I had the same interest in lowering my 06 ML500. Using the search feature will provide you with a great deal of info from past threads.
After my past search on the topic, it seems like there is a good chance of alignment issues so I've decided against it. Plus, with 19" wheels, my ride is already as firm as I want it. In any event, best of luck and be sure to post pics/info if you get it done!
After my past search on the topic, it seems like there is a good chance of alignment issues so I've decided against it. Plus, with 19" wheels, my ride is already as firm as I want it. In any event, best of luck and be sure to post pics/info if you get it done!
#3
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
I know it will be more firm with the 20" wheels than it is with 18", but visually itīs not what I like, the space from the wheels to the car is too much; What I really like is 22" wheels and bit lower, but thatīs out of question because roads here are not really the best, and it would be too firm, so iīm trying to get in the middle of it, a bit firm and better look than it has. Thank you for your help, I will post pictures when get it done.
Sorry about my english, it would be better in Portuguese.
Sorry about my english, it would be better in Portuguese.
#5
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
Thank you for your help, after using the search feature I decided for the Eibach springs, will have them in two or three weeks, just hope itīs the best option in my case. will post pictures after install.
#6
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
I just lowed down my ML500 with Eibach Sport Spring too, my car has a much better outlook with her 22" rims now .
Trending Topics
#10
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
#11
Senior Member
Join Date: Nov 2005
Location: South Florida
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
2006 ML500
Looks great! More pics please! Is the ride alot firmer or rougher than stock? I would love to get some springs with my 20" wheels, but I'm worried about the alignment issues....
#12
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
The ride is a bit rougher than before but I can accept.
Do not worry abt the alignment issues which the tuning shop will handle it perfectly.
#14
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
#15
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
Yes, I did, but donīt know what wheels should I put. I like those original ML63 ones but I think tires are too big(295) for a 320 CDI, I like brabus VI too but never saw them in 20" mounted on an ML w164; in 22" it would be easy because most of them look big enough, in 20" most of them look small. Iīm doing things slowly. Bought front brabus lights that will come next week, european bixenon Headlights, eibach springs, ml63 steering wheel and if decide to put ML63 Wheels I will go for the wheel arcs too. Almost forgot, puted double exhaust tips too.
I like those wheels on your ML, Kahn design isnīt it?
I like those wheels on your ML, Kahn design isnīt it?
Last edited by Philport; 03-05-2008 at 04:51 PM.
#16
Senior Member
Join Date: Nov 2005
Location: South Florida
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
2006 ML500
For another idea...here is a pic of my ML500 with the OZ wheels 20". I honestly don't think I'd want them any bigger than 20" at least in this design. Hard to tell from the pics, but in person they look much bigger.
#18
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
Here in Hong Kong, it's abt USD650 for the low-down including installation and 4-wheel alignment.
#19
Senior Member
Join Date: Nov 2005
Location: South Florida
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
2006 ML500
Hong Kong! Off-topic, but the last airline I flew as a pilot for (see avatar) had our base in Macau and we did lots of trips into Hong Kong, Shanghai, Taipei, etc.... Still have some fancy Rolex's to show for it....haha
It just takes one look at the huge cargo ramp in HK FULL of 747's being loaded with merchandise to know which country is in major growth mode.
I will look into the springs down here in Miami to price them out. Anyone know a cheap place to order them from on the internet? Thx!
It just takes one look at the huge cargo ramp in HK FULL of 747's being loaded with merchandise to know which country is in major growth mode.
I will look into the springs down here in Miami to price them out. Anyone know a cheap place to order them from on the internet? Thx!
#20
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
the springs arenīt expensive, will cost you around us$400,00, this from eibach, if you go through brabus or carlsson(made from eibach, i guess) price goes 50% plus and you also get a carlsson or brabus sticker, hehehe...
#21
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
How much are you gonna pay for the installation and wheel alignment in your country? Phil.
#22
Almost a Member!
Thread Starter
Join Date: Jan 2008
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ML320CDI
#23
Member
Join Date: Jan 2004
Location: HK
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
2010 BMW F10 535i
Yes, I did, but donīt know what wheels should I put. I like those original ML63 ones but I think tires are too big(295) for a 320 CDI, I like brabus VI too but never saw them in 20" mounted on an ML w164; in 22" it would be easy because most of them look big enough, in 20" most of them look small. Iīm doing things slowly. Bought front brabus lights that will come next week, european bixenon Headlights, eibach springs, ml63 steering wheel and if decide to put ML63 Wheels I will go for the wheel arcs too. Almost forgot, puted double exhaust tips too.
I like those wheels on your ML, Kahn design isnīt it?
I like those wheels on your ML, Kahn design isnīt it?