HELP!!!!! 07 ML 350 HEADLIGHTS
Thread Starter
Newbie
Joined: Sep 2013
Posts: 5
Likes: 0
2007 Mercedes Benz ML 350
HELP!!!!! 07 ML 350 HEADLIGHTS
Hi guys could you please help me?
Is there anyone out there with instructions as to how to change the light bulbs on my 07 ML 350 with out removing the front Bumper.
A video would be awesome. I am so frustrated
.
Is there anyone out there with instructions as to how to change the light bulbs on my 07 ML 350 with out removing the front Bumper.
A video would be awesome. I am so frustrated
.
Thread Starter
Newbie
Joined: Sep 2013
Posts: 5
Likes: 0
2007 Mercedes Benz ML 350
the I have two blown headlights and High beam light bulbs, but it appear to be an impossible to replace without taking the bumper apart, do you have a video on how to do it with out taking the bumper off? please advise
Member
Joined: Jan 2010
Posts: 131
Likes: 1
2006 ml350
Refer to your owners manual. It has pictures and instructions. I have a summary below:
The head lamps can be accessed from the rear of the light fixture (each lamp hi/lo beam) has a black cover that needs to be removed first. The bulbs (H7's I believe) are then a 1/4 turn to remove the socket from the rear of the fixture... pull out the old bulb and install the new bulb. Install in the reverse order.
Remember not to touch the new bulb glass when you install it.
Hope this helps.
The head lamps can be accessed from the rear of the light fixture (each lamp hi/lo beam) has a black cover that needs to be removed first. The bulbs (H7's I believe) are then a 1/4 turn to remove the socket from the rear of the fixture... pull out the old bulb and install the new bulb. Install in the reverse order.
Remember not to touch the new bulb glass when you install it.
Hope this helps.
Thread Starter
Newbie
Joined: Sep 2013
Posts: 5
Likes: 0
2007 Mercedes Benz ML 350
Thank you so very much, I've tried to do exactly as the owners manual said, but with no luck, I cant get the unit to turn to come out, my hand are to big, I just cant find the way to do it, I had 4 people try and nothing, one of them is a mechanic.
I was wondering if anyone had a video.Thanks
I was wondering if anyone had a video.Thanks
