Air Sensors
12-30-2014, 08:13 AM
#1
Newbie
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ML320 2008
Air Sensors
I've got a couple faults that havede the engine management to come on the dash; after looking up on diagnosticsit has come to light that
1. Air Mass Meter fault
2. Air Intake Sensor fault
3. EGR Valve fault
After trying to reset the faults on the diagnostics the engine management light goes out but not reset on the diagnostic and performance of the engine is restored. After switching off and restarting the engine after resting the light comes back on.
My question is, could any one of the sensors cause all 3 faults similtaneously or what are the chances of all 3 to be faulty at the same time ? (Although not impossible).
1. Air Mass Meter fault
2. Air Intake Sensor fault
3. EGR Valve fault
After trying to reset the faults on the diagnostics the engine management light goes out but not reset on the diagnostic and performance of the engine is restored. After switching off and restarting the engine after resting the light comes back on.
My question is, could any one of the sensors cause all 3 faults similtaneously or what are the chances of all 3 to be faulty at the same time ? (Although not impossible).
