No hot air on drivers side..
#1
Newbie
Thread Starter
No hot air on drivers side..
Hi all.
My ML has 2 zone climate
Have a problem with heat on drivers side. Directions flaps seem to work fine. So I'm thinking defekt cold/hot blending flaps or temp censor?
How to get to the blending actuator for the drivers side?
Hope you can help.
Best regards Thorsten
My ML has 2 zone climate
Have a problem with heat on drivers side. Directions flaps seem to work fine. So I'm thinking defekt cold/hot blending flaps or temp censor?
How to get to the blending actuator for the drivers side?
Hope you can help.
Best regards Thorsten
#2
MBWorld Fanatic!
Is your veh. left hand or right hand drive?
Guessing at what the problem could be can be solved by having the codes stored in the AAC Control Module. Look at all the possibilities.
Guessing at what the problem could be can be solved by having the codes stored in the AAC Control Module. Look at all the possibilities.
#3
Newbie
Thread Starter
Thanks for the reply :-)
Lefthand drive.
I've had a full dianostic and no fault code on climate or anything related. Can I get live feed from tempcensor and where actuators are suuposed to be??
Best Thorsten
Lefthand drive.
I've had a full dianostic and no fault code on climate or anything related. Can I get live feed from tempcensor and where actuators are suuposed to be??
Best Thorsten
The following users liked this post:
Tmva (12-14-2017)
#5
Newbie
Thread Starter
Local mecanic did the diagnostics, don't know the scanner.
Think I can get my hand on a delphi scanner will that do? And the code in AAC is that to make it do a diagnostic on the clima?
Best regards Thorsten
Think I can get my hand on a delphi scanner will that do? And the code in AAC is that to make it do a diagnostic on the clima?
Best regards Thorsten