exhaust gas temperature sensor circuit high bank 1 sensor 3
#1
Junior Member
Thread Starter
exhaust gas temperature sensor circuit high bank 1 sensor 3
Hi,
I was wondering if an IT that don’t know that much in cars can replace that sensor on an ML350 2011?
The genuine sensor is about 100$ on eBay. removing and plugging the new one looks easy but I don't know where it's located.
Any advice or it’s better to simply go to the dealer.
They won't be to happy to see me again, I got a park hit & run on the brand new CLA the lend me last month
I was wondering if an IT that don’t know that much in cars can replace that sensor on an ML350 2011?
The genuine sensor is about 100$ on eBay. removing and plugging the new one looks easy but I don't know where it's located.
Any advice or it’s better to simply go to the dealer.
They won't be to happy to see me again, I got a park hit & run on the brand new CLA the lend me last month
#5
MBWorld Fanatic!
Thanks for updating.
The code you posted is not a valid M/B code. Your code reader transposes the real code, which is six digits long, into their own number.
Here is the location of the sensor.
The code you posted is not a valid M/B code. Your code reader transposes the real code, which is six digits long, into their own number.
Here is the location of the sensor.
#7
MBWorld Fanatic!
CEL activated and scan came back as and yes I know this is not a valid M/B code but my ODBII reader found a code P042D. This is
Its a 2012 E350 Bluetec
Thanks in advance
Catalyst Temperature Sensor Circuit High Bank 1 Sensor 2
I have bought the service manual from Emanual online. I have checked the exhaust diagram but it doesnt say which one is sensor 2. I know bank one is on the Passenger side (left hand drive vehicle) but which one is sensor 2?Its a 2012 E350 Bluetec
Thanks in advance
The following users liked this post:
Skillz (07-26-2021)