M-Class (W164) Produced 2006-2011: ML280CDI, ML320CDI, ML420CDI, ML350, ML500, ML550

Blade key stuck in door

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-20-2020 | 03:56 PM
  #1  
Spod's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 5
Likes: 0
ML320
Blade key stuck in door

Hello All,

I used my blade key in the driver side door after the battery went dead. I successfully opened the door by turning the key counter clockwise to the right.
I wanted to see if I could lock it with the blade key while I put a charger on. I turned the key to clockwise to the left. It didn't lock and now I can't get the key out!
Any ideas?
Old 09-20-2020 | 04:51 PM
  #2  
Maj. Dundee's Avatar
MBWorld Fanatic!
 
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Dis connect the NEGATIVE battery cable and see if the key comes out.
Old 09-22-2020 | 08:10 PM
  #3  
Spod's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 5
Likes: 0
ML320
Tried it with no luck ... sigh
Old 09-22-2020 | 08:20 PM
  #4  
Maj. Dundee's Avatar
MBWorld Fanatic!
 
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Then remove the door lock cylinder and then remove the electrical connector.
Attached Files
Old 09-23-2020 | 07:08 PM
  #5  
Spod's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 5
Likes: 0
ML320
Will try this weekend after the rains!
ty

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Blade key stuck in door



All times are GMT -4. The time now is 03:38 PM.