2007 ML350 sunroof shade panel not sliding back.
12-05-2020 | 07:00 PM
#1
Thread Starter
Newbie
Joined: Dec 2020
Posts: 3
Likes: 0
2007 ML350
2007 ML350 sunroof shade panel not sliding back.
Hello all! New to the MB world. Picked up a low mileage 07 ML350. Very little issues.
The sunroof shade panel only moves back and forth with the glass. I tried persuading it (not too forcefully) to slide back to have just the glass showing and it wont budge. Is there a procedure or more force required to unclip it from the glass?!
The sunroof shade panel only moves back and forth with the glass. I tried persuading it (not too forcefully) to slide back to have just the glass showing and it wont budge. Is there a procedure or more force required to unclip it from the glass?!
Last edited by Wcsco123; 12-06-2020 at 01:18 PM.
12-06-2020 | 07:59 AM
#2
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
I don't understand this.....................The glass sunroof sliding panel only moves back and forth with the sunroof.
Read pages 241-244 in your owner's manual, it must be re- synchronized.
And also read pg. 478 for emergency closing.
Read pages 241-244 in your owner's manual, it must be re- synchronized.
And also read pg. 478 for emergency closing.
Last edited by Maj. Dundee; 12-06-2020 at 08:28 AM.
12-07-2020 | 04:21 AM
#4
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
12-08-2020 | 01:05 PM
#5
Thread Starter
Newbie
Joined: Dec 2020
Posts: 3
Likes: 0
2007 ML350
Is there anything I should be looking for? because its seemingly locked in place. It moves back and forth about an inch and thats all. I have seen others that are clipped in some form or another, unless this one is obstructed somewhere.
