Sunroof button replacement
#1
Sunroof button replacement
Hi guys, today one leg of the sunroof switch/button broke off and gets stuck when pulling down to close the sunroof.
i have taken the dome apart and got to the switch mechanism but not sure if I can replace without breaking the plastic housing.
maybe someone knows if this is a replaceable part or do I need to buy another dome altogether? Thanks.
i have taken the dome apart and got to the switch mechanism but not sure if I can replace without breaking the plastic housing.
maybe someone knows if this is a replaceable part or do I need to buy another dome altogether? Thanks.
#2
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
There are no individual replaceable parts for the Overhead Cont. Module.
See if ebay has your color.
https://www.ebay.com/sch/i.html?_fro...odule&_sacat=0
See if ebay has your color.
https://www.ebay.com/sch/i.html?_fro...odule&_sacat=0
The following users liked this post:
Talal Al Hadidi (06-12-2021)
#3
I just got a replacement on Ebay. Incredibly easy to replace. The original button is already broken, and those pins will break upon removing anyhow but literally, pull it straight out, and then push the new one up in. Be sure any broken pins have been removed. I got the wrong color and it's a tiny bit different shape but works flawlessly. I have the correct one incoming. it was like under $10. don't have to remove anything other than pulling the button itself straight down. not even "locked" in. again, it's just those long skinny pins that'll snap most likely pulling it out. (4 pins, 2 front and 2 back as pictured above)
The following users liked this post:
Sapmike16 (09-26-2021)