2006 ML320CDI traction control going off prematurely
Thread Starter
Senior Member
Joined: Oct 2015
Posts: 397
Likes: 23
From: Queensalnd Australia
2006 ML320 CDI (2 of) and 2008 GL320
2006 ML320CDI traction control going off prematurely
I have a 06 ML320 with 320,000km on it. When I turn more than say half turn on the steering wheel and do a brisk acceleration (to enter a intersection etc. (no where near fast enough to break traction) I get the ASC engage momentarily.
this is my daughter’s car and on my 08GL or wifes 06 ML Doing same manoeuvre I don’t get the ASC engage
I do have a code for faulty steering wheel angle sensor as stored only but the live data gives normal data for steering angle with wheel movements so don’t know why I have the code
. I don’t have a warning light error (sometimes the ASC light flashes as you would expect when it engages but no messages on dash read out at all
i don’t really want to change the sensor just as a trial as I don’t see why it would be faulty if the live data is normal
any thoughts appreciated
this is my daughter’s car and on my 08GL or wifes 06 ML Doing same manoeuvre I don’t get the ASC engage
I do have a code for faulty steering wheel angle sensor as stored only but the live data gives normal data for steering angle with wheel movements so don’t know why I have the code
. I don’t have a warning light error (sometimes the ASC light flashes as you would expect when it engages but no messages on dash read out at all
i don’t really want to change the sensor just as a trial as I don’t see why it would be faulty if the live data is normal
any thoughts appreciated
