When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello, I have ML350 W164. After jumpstart I get red message ,, drive workshop without changing gear mercedes,,. Car does not cranck and not select gear. If I unplug TCM pin engine start and I can move in 2nd gear, also red message is dissapearing. TCM maybe is burn? What can I do
Originally Posted by GiorgioMercedes;[url=tel:8907412
8907412[/url]]Hello, I have ML350 W164. After jumpstart I get red message ,, drive workshop without changing gear mercedes,,. Car does not cranck and not select gear. If I unplug TCM pin engine start and I can move in 2nd gear, also red message is dissapearing. TCM maybe is burn? What can I do
Sounds like your battery is junk if you have to jump start it. Low battery voltage will cause all kinds of problems.
This code regularly arises due to an undervoltage battery and ot starting system. Less than 11.7v engine off or 13.7 engine on, and you have a failing charging system.
A small drop in voltage sends many of the modules into a fit and this most likely one of them. This message is a common occurrence after a flat battery.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
