OBD2 not connecting to ECU
Thread Starter
Junior Member
Joined: Aug 2019
Posts: 32
Likes: 2
ML-350 W166
OBD2 not connecting to ECU
Hello guys
i have OBD2 BlueDriver device. I used it before in my ML350 and it worked and showed codes.
recently it stopped responding? The flash light on the BlueDriver works indicating the device has power, but it never connects to ECU.
i used the BlueDriver OBD2 device with other cars and it is working so i guess the issue with my ML350
any ideas please?
thx
i have OBD2 BlueDriver device. I used it before in my ML350 and it worked and showed codes.
recently it stopped responding? The flash light on the BlueDriver works indicating the device has power, but it never connects to ECU.
i used the BlueDriver OBD2 device with other cars and it is working so i guess the issue with my ML350
any ideas please?
thx
MBWorld Fanatic!
Joined: Jul 2012
Posts: 1,369
Likes: 319
From: WI
GLK 250
You might want to contact Lemur folks, see about getting a replacement. I've had my BlueDriver not start working when it was already plugged in for awhile (was logging during the drive, then shut off). I just unplugged it and plugged it back in, turned Bluetooth on phone off/on again and reopened the BlueDriver app. All worked well afterwards.
I'm considering upgrading to the iCarSoft V2 for the future since it can do more things than just log and clear error messages. You might look into it as well.
I'm considering upgrading to the iCarSoft V2 for the future since it can do more things than just log and clear error messages. You might look into it as well.
